Amana PACKAGE TERMINAL Especificaciones descargar pdf (Pagina 11)

C/D - 11

ACCESSORY WALL SLEEVE INSTALLATION

Framing for

Accessory Wall Sleeve

(WS900B)

When installed in opening, the Wall

Sleeve must be horizontally level (side-

to-side) and pitched 1/4 bubble to the

outside. (NOTE: To ensure unit’s

maximum efficiency, DO NOT

over- or under-pitch.)

FASTENING WALL SLEEVE

FINISHED FLOOR

42 1/4"

16 1/4"

MIN

MAIN STUD

JACK STUDS

HEADER - 4" x 4" OR

DOUBLE 2"x 4" ON EDGE

SUB-FLOOR

CRIPPLE

JACK STUD

ADJUST FRAMING TO

SECURE THIS DIMENSION

INSTALLATION NOTES

(1). If Subbase (PTSB***C) is installed, allow minimum 3-1/4” height clearance and maximum 5” height

clearance between wall sleeve and floor; allow minimum 2-3/4” protrusion from a finished wall. See

Note 4 if using hydronic units.

(2). Drain Kit (DK9001) shipped separately. Can be mounted either right side, left side, or bottom of sleeve.

If mounted to bottom of sleeve, allow 2” height clearance from floor to bottom of sleeve.

(3). For U.L. approval -- 265v units must use Amana Subbase (PTSB***C) or Amana Hard Wire Kit

(PTPWHWK4). Over-current protection on 265V units must be by cartridge style time delay fuses which

are included and factory installed on Amana 265v chassis.

(4). If Hydronic Kit (HWK03 or HVK03) is installed, Wall Sleeve must extend exactly 3 inches into the room

from finished interior wall. If using subbase (PTSB***C) only the minimum 3¼” height clearance

between wall sleeve and floor is permissible.

(5). If Duct Kit (MDK02) is installed, allow minimum 1-3/8” into the room from finished interior wall.

Wall Sleeve must extend a

minimum of ¼” beyond

outside wall to allow for

proper caulking.

2" MIN

WOOD SCREW

TOGGLE BOLT

EXPANSION

ANCHOR BOLT

SCREWS

PLASTIC

ANCHOR

MOUNTING HOLES

(drilled by Installer)

NO HOLES

PERMITTED IN

BOTTOM OF CASE

(EXCEPTION -- INTERNAL

DRAIN KIT)

AMANA C/D MODELS

1 2 ... 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Amana PACKAGE TERMINAL Especificaciones Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Amana PACKAGE TERMINAL